-
Start at 40,000.00 THB
DRUCK DPI 811, 812
RTD Calibrator /
Loop Calibrator
The DPI 800 Series is a complete range of advanced, robust
and simple to use hand-held instruments. Highly cost
effective, these tools are ideal for test/calibration of many
popular process parameters. Advanced features and
technical innovations address more applications in less time
and deliver results you can rely on.
Features
Features
• Measure and simulate RTDs
• Automatic detection of two-, three- and four-wire RTDs highlights faulty probes
• mA measure, switch test and 24V loop power
• Large backlit display, menu driven interface
• HART® loop resistor
• Robust and weatherproof
• Compact, simple to use, easy to carry
• Convenient, one-handed operation
• Secure grip, impact resistant, elastomer protection
• Plug and play connector for Intelligent Digital Output Sensor (IDOS™) Universal Measurement Modules
Specification
| DPI 811 and DPI 812 | |||
| Measure | Standard | *Accuracy | Range |
| Pt 50 (385) | IEC 751 | 0.9°F (0.5°C) | -328°F to 1562°F |
| (-200°C to 850°C) | |||
| Pt 100 (385) | IEC 751 | 0.45°F (0.25°C) | -328°F to 1562°F |
| (-200°C to 850°C) | |||
| Pt 200 (385) | IEC 751 | 1.08°F (0.6°C) | -328°F to 1562°F |
| (-200°C to 850°C) | |||
| Pt 500 (385) | IEC 751 | 0.72°F (0.4°C) | -328°F to 1562°F |
| (-200°C to 850°C) | |||
| Pt 1000 (385) | IEC 751 | 0.36°F (0.2°C) | -328°F to 752°F |
| (-200°C to 400°C) | |||
| D 100 (392) | JIS 1604-1989 | 0.45°F (0.25°C) | -328°F to 1202°F |
| (-200°C to 650°C) | |||
| Ni 100 | DIN 43760 | 0.36°F (0.2°C) | -76°F to 482°F |
| (-60°C to 250°C) | |||
| Ni 120 | MINCO 7-120 | 0.36°F (0.2°C) | -112°F to 500°F |
| (-80°C to 260°C) | |||
| Ohms | 0 to 4000 | 0.1 to 1.3 Ω |
Resources